Javascript DHTML Drop Down Menu Powered by

Acrylic Road Marking Paint

Product Description This is a special road marking paint based on thermoplastic resin fortified with speciality resin to have better durability.
Recommended Uses Specially formulated for road marking application. It can also be used on metal surfaces.
Mixing Ratio
One pack
Colour Golden Yellow ,Black & shades as per customer’s requirement.
Finish Matt – Semi Glossy
Pot Life N.A
Volume Solids 35 % 5 depending on shades .
Flash point More than 24 C
Recommended DFT 25 - 30 microns per coat
Covering Capacity 8 to 10 sq.mtrs / ltr
( Theoretical )
Stoving Schedule N.A.
Drying Time Surface dry – 15 to 20 mins at 30 C & 65 % Relative Humidity

Hard Dry – 4 to 5 hrs max at 30 C & 65 % Relative Humidity
Recoating Time Minimum : 2 hrs Max : None
Method of Application Brush / Conventional Spray
Thinner recommended ‘ Spectraplast’ Thinner
Shelf life 12 months under normal storage conditions in original sealed containers.
Surface Preparation Surface should be free from oil , grease , moisture and any other foreign matter.
Remarks 1. Application Data
Method Pressure ( Atm) Nozzle Thinner Thinner volume
Brush / Roller - - Spectraplast Thinner 0 – 5 %
Conven.Spray 4 – 5
Spectraplast Thinner 15-20 %
2. Don’t use below 10 C
3. Stirr well before and while using .
4. Film thickness other than indicated also possible.
Safety Precautions :
  Provide sufficient ventilation while working with solvent based paints in confined spaces and stagnant air.
  Keep the material away from heat , spark and direct flame
  Avoid inhalation of solvent vapour or paint mist by using facial mask .Use goggles and gloves to protect against direct contact of paint with
   skin and eyes.
  In case of contamination , rinse with fresh running water and seek medical help at once.
  Follow local & national safety rules.
Special Comments :
  Thinner consumption and actual coverage of paint depends on the site conditions.
  Stir the paint well before painting and while painting if necessary.
  Material should be stored at 30 C temperature in dry place.
Epoxy Paint System - EPICOR : Epoxy Primer  |   Epoxy Finish Paint   |   Epoxy High Build Finish Paint-Polyamide Hardener   |  
Epoxy High Build MIO Paint  |  Epoxy Mastic Paint   |  One Pack Epoxy Primer   | 
One Pack Epoxy Finish Paint
  |  Coal Tar Epoxy Coating Paint    |   Special Epoxy Primer for Copper / GI / Aluminium Surface   |   Epoxy Zinc Rich Primer
Polyurethane Paint System - POLYCOR : Polyurethane Primer   |   Polyurethane Finish Paint
Quick Drying Paint System - SPECTRACOAT : Quick Drying Primer    |   Quick Drying Finish Paint
Synthetic Enamel Paint System - SPECTRACOAT : Redoxide Zinc Chromate Primer  |  Synthetic Enamel Finish Paint
Heat Resistant Paint System- SPECTRACOAT : Heat Resistant Aluminium Paint 200degree C   |  Heat Resistant Aluminium Paint 400degree C   |
Heat Resistant Aluminium Paint 600degree C
Acrylic Paint System - SPECTRAPLAST : Acrylic Primer   |   Acrylic Finish Paint   |   Acrylic Road Marking Paint
Chlorinated Rubber Paint System- SPECTRACHLOR : Chlorinated Rubber Primer   |  Chlorinated Rubber Finish Paint
Etch Primer Paint - SPECTRACOAT    
Zinc Silicate Coating Paint - SPECTRACOAT    
Designed & Hosted by : MID    Promoted by : GID