Javascript DHTML Drop Down Menu Powered by

Heat Resistant Aluminium Paint 600o C

Product Description It is single pack Aluminium paint based on special resin.It has good anticorrosive properties along with dry heat resistance upto 600 °C
Recommended Uses This is used as a protective coating for chimneys,spacks, pipelines ,cargo holes etc.
Mixing Ratio
Colour Aluminium
Finish Metallic lusture
Pot Life N.A.
Volume Solids 40 % ± 2
Flash point Above 24 °C
Recommended DFT 25 - 30 microns per coat
Covering Capacity 13 – 16 sq.mtrs / ltr
( Theoretical )
Drying Time Surface dry – 1 to 2 hrs at 30 °C & 65 % Relative Humidity

Hard Dry – 8-10 hrs at 30 °C & 65 % Relative Humidity
Stoving Schedule N.A..
Recoating Time Min 10 hrs. at 30 °C & 65 % Relative Humidity Max - None
Method of Application Brush / Conventional Spray / Airless Spray
Thinner recommended ‘ Spectracoat ’ Thinner
Shelf life 9 months under normal storage conditions in original sealed containers .
Surface Preparation Surface should be free from mill scales , rust , oil , grease , moisture and any other foreign matter and properly primed.
Subsequent coat N.A.
Remarks 1. Application Data
Method Pressure ( Atm) Nozzle Thinner Thinner volume



Spectracoat Thinner 0-5 %
Conven.Spray 4 – 5 0.021 inch Spectracoat Thinner 10-15 %
Airless Spray 4 – 5 0.013 inch to 0.021 inch Spectracoat Thinner 0-5 %
2. Don’t use below 10 °C
3. Store in cool & dry place
4. Mix till homogeneous & leave for 15 minutes before use.
Safety Precautions :
  Provide sufficient ventilation while working with solvent based paints in confined spaces and stagnant air.
  Keep the material away from heat , spark and direct flame
  Avoid inhalation of solvent vapour or paint mist by using facial mask .Use goggles and gloves to protect against direct contact of paint with
   skin and eyes.
  In case of contamination , rinse with fresh running water and seek medical help at once.
  Follow local & national safety rules.
Special Comments :
  Thinner consumption and actual coverage of paint depends on the site conditions.
  Stir the paint well before painting and while painting if necessary.
  Material should be stored at 30 ºC temperature in dry place.
Epoxy Paint System - EPICOR : Epoxy Primer  |   Epoxy Finish Paint   |   Epoxy High Build Finish Paint-Polyamide Hardener   |  
Epoxy High Build MIO Paint  |  Epoxy Mastic Paint   |  One Pack Epoxy Primer   | 
One Pack Epoxy Finish Paint
  |  Coal Tar Epoxy Coating Paint    |   Special Epoxy Primer for Copper / GI / Aluminium Surface   |   Epoxy Zinc Rich Primer
Polyurethane Paint System - POLYCOR : Polyurethane Primer   |   Polyurethane Finish Paint
Quick Drying Paint System - SPECTRACOAT : Quick Drying Primer    |   Quick Drying Finish Paint
Synthetic Enamel Paint System - SPECTRACOAT : Redoxide Zinc Chromate Primer  |  Synthetic Enamel Finish Paint
Heat Resistant Paint System- SPECTRACOAT : Heat Resistant Aluminium Paint 200degree C   |  Heat Resistant Aluminium Paint 400degree C   |
Heat Resistant Aluminium Paint 600degree C
Acrylic Paint System - SPECTRAPLAST : Acrylic Primer   |   Acrylic Finish Paint   |   Acrylic Road Marking Paint
Chlorinated Rubber Paint System- SPECTRACHLOR : Chlorinated Rubber Primer   |  Chlorinated Rubber Finish Paint
Etch Primer Paint - SPECTRACOAT    
Zinc Silicate Coating Paint - SPECTRACOAT    
Designed & Hosted by : MID    Promoted by : GID