Chlorinated Rubber Primer

TECHNICAL DATA SHEET

Product Description	This is a Chlorinated Rubber Primer based on specially made chlorinated rubber resin.
Recommended Uses	This product has good resistance to inorganic acids, alkalis, etc.and good water resistance hence it is recommended to be used in chemical environments .

PRODUCT SPECIFICATION

Mixing Ratio	One pack
Colour	Redoxide , Grey
Finish	Matt to Glossy
Pot Life	N.A
Volume Solids	35 to 40 % depending on the shade
Flash point	More than 25 ^oC
Recommended DFT	25- 30 microns per coat
Covering Capacity	11 to 15 sq.mtrs / ltr
( Theoretical )
Drying Time	Surface dry – 15 to 20 mins at 30 ^oC & 65 % Relative Humidity
	Hard Dry – 6 to 8 hrs at 30 ^oC & 65 % Relative Humidity
Stoving Schedule	N.A..
Recoating Time	Min 4 hrs. at 30 ^oC & 65 % Relative Humidity Max - None
Method of Application	Brush / Airless Spray
Thinner recommended	‘ Spectrachlor ’ Thinner
Shelf life	12 months under normal storage conditions in original sealed containers.

Surface Preparation

Surface should be free from mill scales , rust , oil , grease , moisture and any other foreign matter and properly primed.

Remarks 1. Application Data

Method	Pressure ( Atm)	Nozzle	Thinner	Thinner volume
Brush	-	-	Spectrachlor Thinner	0 – 5 %
Airless Spray	4 – 5	0.013 inch to 0.021 inch	Spectrachlor Thinner	0 – 5 %

2. Don’t use below 10 ^oC
3. Stirr well before and while using .
4. Film thickness other than indicated also possible.

Safety Precautions :

Provide sufficient ventilation while working with solvent based paints in confined spaces and stagnant air.

Keep the material away from heat , spark and direct flame

Avoid inhalation of solvent vapour or paint mist by using facial mask .Use goggles and gloves to protect against direct contact of paint with
skin and eyes.

In case of contamination , rinse with fresh running water and seek medical help at once.

Follow local & national safety rules.

Special Comments :

Thinner consumption and actual coverage of paint depends on the site conditions.

Stir the paint well before painting and while painting if necessary.

Material should be stored at 30 ^oC temperature in dry place.

Epoxy Paint System - EPICOR	:	Epoxy Primer \| Epoxy Finish Paint \| Epoxy High Build Finish Paint-Polyamide Hardener \| Epoxy High Build MIO Paint \| Epoxy Mastic Paint \| One Pack Epoxy Primer \| One Pack Epoxy Finish Paint \| Coal Tar Epoxy Coating Paint \| Special Epoxy Primer for Copper / GI / Aluminium Surface \| Epoxy Zinc Rich Primer
Polyurethane Paint System - POLYCOR	:	Polyurethane Primer \| Polyurethane Finish Paint
Quick Drying Paint System - SPECTRACOAT	:	Quick Drying Primer \| Quick Drying Finish Paint
Synthetic Enamel Paint System - SPECTRACOAT	:	Redoxide Zinc Chromate Primer \| Synthetic Enamel Finish Paint
Heat Resistant Paint System- SPECTRACOAT	:	Heat Resistant Aluminium Paint 200degree C \| Heat Resistant Aluminium Paint 400degree C \| Heat Resistant Aluminium Paint 600degree C
Acrylic Paint System - SPECTRAPLAST	:	Acrylic Primer \| Acrylic Finish Paint \| Acrylic Road Marking Paint
Chlorinated Rubber Paint System- SPECTRACHLOR	:	Chlorinated Rubber Primer \| Chlorinated Rubber Finish Paint
Etch Primer Paint - SPECTRACOAT
Zinc Silicate Coating Paint - SPECTRACOAT

Designed & Hosted by : MID Promoted by : GID