Etch Primer Paint - SPECTRACOAT

TECHNICAL DATA SHEET

Product Description	It is vinyl ester resin based two component primer. It dries very quickly and orms anticorrosive coating having excellent adhesive properties.
Recommended Uses	This is used as a primer on Aluminium and Galavanised steel to promote the adhesion of subsequent coatings.

PRODUCT SPECIFICATION

Mixing Ratio	1 : 1
Colour	Yellow green
Finish	Matt
Pot Life	6 to 8 hrs.
Volume Solids	10 % � 2
Flash point	More than 12 �C
Recommended DFT	7 - 8 microns per coat
Covering Capacity	12 to 14 sq.mtrs / ltr
( Theoretical )
Drying Time	Surface dry – 10 to 15 mins at 30 �C & 65 % Relative Humidity
	Hard Dry – 4 - 6 hrs at 30 �C & 65 % Relative Humidity
Stoving Schedule	N.A..
Recoating Time	Min 6 to 8 hrs. at 30 �C & 65 % Relative Humidity Max - None
Method of Application	Conventional Spray
Thinner recommended	‘ Spectracoat ’ Etch Thinner
Shelf life	12 months under normal storage conditions in original sealed containers and in separate packs.

Surface Preparation	Surface should be free from mill scales , rust , oil , grease , moisture and any other foreign matters.
Subsequent coat	As per recommended coating system.

Remarks 1. Application Data

Method	Pressure ( Atm)	Nozzle	Thinner	Thinner volume
Conven.Spray	3 – 4		Spectracoat EtchThinner	10 -30 %

2. Don’t use below 10 �C
3. Stirr well before and while using .
4. Film thickness other than indicated also possible.

Safety Precautions :

Provide sufficient ventilation while working with solvent based paints in confined spaces and stagnant air.

Keep the material away from heat , spark and direct flame

Avoid inhalation of solvent vapour or paint mist by using facial mask .Use goggles and gloves to protect against direct contact of paint with
skin and eyes.

In case of contamination , rinse with fresh running water and seek medical help at once.

Follow local & national safety rules.

Special Comments :

Thinner consumption and actual coverage of paint depends on the site conditions.

Stir the paint well before painting and while painting if necessary.

Material should be stored at 30 �C temperature in dry place.

Epoxy Paint System - EPICOR	:	Epoxy Primer \| Epoxy Finish Paint \| Epoxy High Build Finish Paint-Polyamide Hardener \| Epoxy High Build MIO Paint \| Epoxy Mastic Paint \| One Pack Epoxy Primer \| One Pack Epoxy Finish Paint \| Coal Tar Epoxy Coating Paint \| Special Epoxy Primer for Copper / GI / Aluminium Surface \| Epoxy Zinc Rich Primer
Polyurethane Paint System - POLYCOR	:	Polyurethane Primer \| Polyurethane Finish Paint
Quick Drying Paint System - SPECTRACOAT	:	Quick Drying Primer \| Quick Drying Finish Paint
Synthetic Enamel Paint System - SPECTRACOAT	:	Redoxide Zinc Chromate Primer \| Synthetic Enamel Finish Paint
Heat Resistant Paint System- SPECTRACOAT	:	Heat Resistant Aluminium Paint 200degree C \| Heat Resistant Aluminium Paint 400degree C \| Heat Resistant Aluminium Paint 600degree C
Acrylic Paint System - SPECTRAPLAST	:	Acrylic Primer \| Acrylic Finish Paint \| Acrylic Road Marking Paint
Chlorinated Rubber Paint System- SPECTRACHLOR	:	Chlorinated Rubber Primer \| Chlorinated Rubber Finish Paint
Etch Primer Paint - SPECTRACOAT
Zinc Silicate Coating Paint - SPECTRACOAT

Designed & Hosted by : MID Promoted by : GID